whatsapp
Brand APC UPS System On Line UPS APC - Schneider Electric Make 10 KVA 3/1:1 Phase Rack Mountable On-Line UPS with External Batteries Pack

APC - Schneider Electric Make 10 KVA 3/1:1 Phase Rack Mountable On-Line UPS with External Batteries Pack

SRV10KRIL-IN

UPS System On Line UPS

Price: 169330

MRP 234407 You save 65077

APC Easy UPS On-Line SRV 10000VA RT 230V India - Extended Runtime Battery Pack

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions

Includes: Basic UPS signalling RS-232 cable, CD with software, Rack mounting brackets, Stabilization/wall mounting feet, USB cable, User manual

Key Features

  • Automatic internal bypass
  • Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load

  • Automatic restart of loads after UPS shutdown
  • Automatically starts up the connected equipment upon the return of utility power.

  • ECO Mode
  • Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

  • EPO
  • Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation

  • Hard Wire Input
  • UPS requires a hard wire input in order to deliver maximum output wattage to protected equipment

  • Input power factor correction
  • Minimizes installation costs by enabling the use of smaller generators and cabling.

  • Intelligent battery management
  • Maximizes battery performance, life, and reliability through intelligent, precision charging.

  • Intelligent SmartSlot
  • Mini slot supports various optional management cards which provide basic or essential monitoring, management and control features for the UPS.

  • LCD graphics display
  • Text and mimic diagrams that display modes of operation, system parameters and alarms

  • Rack/Tower convertible
  • Protects the initial investment in the UPS when migrating from tower to rack-mount environment.


    Reset default

    Features

    Easy UPS On Line Features
    Features
    ECO Mode
    Operating mode that by-passes unused electrical components in good power conditions to achieve high
    Generator Compatibility
    Allows you to recharge your battery while on generator power.
    Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
    Safety-agency Approved
    Ensures the product has been tested and approved to work safely with the connected service provider
    High efficiency
    High efficiency rates that remain stable even at lower operating power levels
    Pure sine wave output on battery
    Simulates utility power to provide the highest degree of compatibility for active PFC (power factor
    Management Software
    Allows you to easily monitor your utility power and manage your UPS.
    Double conversion on-line topology
    Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform
    Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.
    Management Software
    Manageability
    Serial connectivity
    Provides management of the UPS via a serial port.
    Network manageable
    Provides remote power management of the UPS over the network.
    LCD Graphics Display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.
    LED Indicators
    Provide easy-to-read status of the unit and utility power conditions.
    SmartSlot
    Customize UPS capabilities with management cards.
    Serviceability
    Disconnected battery notification
    Warns when a battery is not available to provide backup power.
    Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    Audible alarms
    Provides notification of changing utility power and UPS power conditions
    Predicitive failure notification
    Provides early-warning fault analysis ensuring proactive component replacement.
    Availabilty
    Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.

    Specification

    Output Specification
    Output Capacity (KVA )
    10 KVA
    Output Capacity (KW )
    10 KW
    Output Power Factor
    1 Power Factor
    Output Phase
    1 Phase
    Output Voltage
    230 Volt
    Other Output Voltage
    220 Or 240 Volt
    Efficiency at Full Load
    >94 %
    Output Voltage Distortion
    <2 %
    Output Frequency (sync to mains)
    50/60Hz +/- 3 Hz
    Output Frequency (not synced)
    +/- 0.1% for 50/60Hz Nominal
    Load Crest Factor
    3:1
    Output Voltage THD
    <2 %
    Transfer Time
    <0 Ms
    Output Waveform type
    Sine Wave
    Output Connections
    Hard Wire 3 wire (1PH+N+G)
    Bypass
    Internal Bypass (automatic & manual)
    Overload Capacity
    Yes
    UPS Parallel Upto
    No
    General Specifications
    Flexible Battery Option
    No
    Isolation Transformer
    Optional
    Paralleling Options
    Yes
    Rack Mounting Kit
    Optional
    Paralleling Kit for Synchronising
    Optional
    Input Specification
    Input Voltage
    230 Volt
    Other Input Voltage
    380 Or 415 Volt
    Input Phase
    3 Phase
    Other Input Phase
    1 Or 3 Phase
    Input frequency
    50/60Hz +/- 3 Hz
    Input Voltage Range (Output Derated)
    100 - 280 Volt
    Input voltage range for main operations
    168 - 280 Volt
    Input frequency Range
    40 - 70 Hz
    Input Power Factor
    >0.99 None
    Input Connections
    Hard Wire 3 wire (1PH+N+G)
    Input Protection
    Resettable Circuit Breaker
    Batteries & Runtime
    Internal Battery Capacity (VAH)
    2160 VAH
    Approved Battery Capacity (AH)
    9 - Amp.
    Battery DC Bus
    240 VDC
    Maximum Charger Capacity
    1 Amp.
    Battery Position Option
    Internal
    Battery Type Compatibility
    SMF Battery
    Batteries Recharge Time upto 90%
    <4 Hrs.
    Communication & Management
    Control panel
    Multi-function LCD status and control console
    SNMP Management
    Optional
    Power Management Software
    In-Built
    Interface Port(s)
    DB-9 RS-232, Smart-Slot
    Audible Alarm
    Audible and visible alarms prioritized by severity
    Audible noise at 1 meter from surface of unit
    <55 Decibal
    Physical
    Maximum Height
    220 Mm
    Maximum Width
    438 Mm
    Maximum Depth
    612 Mm
    Net Weight
    79 Kg
    Rack Height(U)
    5 U
    Colour
    Black
    Environmental
    Operating Temperature
    0 - 40 °C
    Operating Relative Humidity
    0 - 95 % Rh
    Operating Elevation
    0 - 1000 Meters
    Storage Temperature
    -15 - +40 °C
    Storage Relative Humidity
    0 - 95 % Rh
    Storage Elevation
    0 - 15000 Meters
    Compliances
    Compliance
    IS 16242 (Part1): 2014
    Approvals
    BIS
    Other Environmental Compliance
    IS 16242 (Part1): 2014
    Other Specifications
    Technology
    Double Conversion Online
    Filtering
    Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
    Surge Protection
    Yes

    Documentation

    Item Manuals and Warranties
    User Manual APC Easy UPS On-Line SRV 6000VA RT
    pdf

    Options

    Services

    Contact Us