Delta Make 20 KVA 3:3 Phase Industrial On-Line UPS With Isolation Transformer ( HPH Series )

Ultron HPH-20kVA Iso-Tx

UPS System Industrial UPS

Price: 359900

MRP 916034 You save 556134

The Ultron HPH is a true online double-conversion UPS offering the best-in-class combination of maximum available power, unbeatable energy efficiency and superior power performance for small data centers and other mission critical applications. With fully rated power (kVA=kW), the Ultron HPH provides maximum available power without de-rating the UPS. Thanks to the three level IGBT topology for both PFC (power factor correction) and inverter, the Ultron HPH features up to 96% AC-AC efficiency. Delta’s advanced digital PFC control also contributes low iTHD < 3% and high input power factor > 0.99 resulting in significant TCO (Total Cost of Ownership) savings. Facilitating increased availability and power performance, the Ultron HPH is an ideal solution for protecting your mission critical operations.

Reset default

Features

Ultron HPH Series Features

Efficiency & Reliability

Fully rated power (kVA=kW) for maximum power availability

Leading AC-AC efficiency up to 96% saves energy costs

Low harmonic pollution (iTHD<3%) & high input power factor (>0.99) reduce upstream investment costs

Assured Reliability

Wide input voltage range allows the UPS to operate in harsh electrical environments and extends battery life

DSP based technology enables reduction in the number of electronic components to lower failure rate

Redundant auxiliary power and fan design* enhance system reliability ( * Applied for models HPH-60/80/100/120K )

Watch-dog design of the DSP (Digital Signal Processor) increases reliability

Built-in manual bypass ensures continuous power to the load even if the UPS is under maintenance

Flexibility

A wide input voltage range of up to 305~477V to reduce battery discharge probability and prolong battery life.

Adjustable charging current and battery voltage meet different battery configuration requirements

Flexible battery configuration optimizes battery investment

Manageability

Swappable interior architecture and front access servicing enables quick and easy maintenance* ( * Applied for models HPH-60/80/100/120K )

Multi-connectivity interface supports remote UPS monitoring and management

Specification

Output Specification

Output Capacity (KVA )

20 KVA

Output Capacity (KW )

20 KW

Output Power Factor

1 Power Factor

Output Phase

3 Phase

Output Voltage

400 Volt

Other Output Voltage

380 Or 415 Volt

Efficiency at Full Load

> 95 %

Output Voltage Distortion

< 3 %

Output Frequency (sync to mains)

50/60Hz +/- 3 Hz

Output Frequency (not synced)

+/- 0.1% for 50/60Hz Nominal

Load Crest Factor

3:1

Output Voltage THD

< 3% linear load and <5% non-linear load

Output Waveform type

Sine Wave

Output Connections

Hard Wire 5-wire (3PH + N + G)

Bypass

Built-in Maintenance Bypass

Overload Capacity

150% for 1 minute 125% for 10 minutes

UPS Parallel Upto

4 Nos.

General Specifications

Isolation Transformer

In-Built

Paralleling Options

Yes

Flexible Battery Option

Yes

Paralleling Kit for Synchronising

In-Built

Input Specification

Input Voltage

400 Volt

Other Input Voltage

380 Or 415 Volt

Input Phase

3 Phase

Input frequency

50 Or 60 Hz

Input frequency Range

45 - 65 Hz

Input Voltage Range (Output Derated)

277 - 485 Volt

Input voltage range for main operations

304 - 477 Volt

Input Power Factor

0.99

Input Connections

Hard Wire 5-wire (3PH + N + G)

Input Voltage THD

< 3 %

Batteries & Runtime

Battery DC Bus

384 - 600 VDC

Battery Type Compatibility

SMF / Flooded Batteries

Battery Position Option

External

Approved Battery Capacity (AH)

26 - 200 Amp.

Battery Circuit Breaker

Optional

Communication & Management

SNMP Management

Optional

Power Management Software

Optional

Audible Alarm

Audible and visible alarms prioritized by severity

Audible noise at 1 meter from surface of unit

< 60 Decibal

Physical

Maximum Height

800 Mm

Maximum Width

380 Mm

Maximum Depth

800 Mm

Net Weight

66.5 Kg

Environmental

Operating Relative Humidity

0 - 95 %

Protection Class

IP20

Operating Temperature

0 - 40 °C

Other Specifications

Technology

Double Conversion Online

Delta Make 20 KVA 3:3 Phase Industrial On-Line UPS With Isolation Transformer ( HPH Series )

Ultron HPH-20kVA Iso-Tx

Features

Specification

Documentation

Options

Delta Make Enviro Probe (Use with the SNMP card for temperature sensing with all UPS)

Delta Make New Mini SNMP IPv6 (For INX/N/R/RT/HPH Gen 2.0 use with Mini/Smart Slot in UPS)

Delta Make Mini SNMP IPv4 (For INX/N/R/RT/HPH Gen 2.0 use with Mini slot in UPS)

Delta Make New Mini Relay I/O card(For INX/N/R/RT/EH/HPH/HPH Gen2.0 use with Mini slot in UPS)

Delta Make New Mini Modbus I/O Card (For INX/N/R/RT/EH/HPH/HPH Gen 2.0 use with Mini slot in UPS)

Delta Make Mini TVSS Card (For INX/N/R/RT/EH/HPH/HPH Gen 2.0 use with Mini/Smart Slot in UPS)

Delta Make SNMP Card IPV6 (Get fitted in smart slot for HPH/EH//NT UPS)

Delta Make SNMP Card IPV4 ( Get fitted in SNMP Slot for HPH/EH/NT UPS )

Delta Make Relay I/O Card (For HPH/EH/NT use with Smart Slot in UPS)

Delta Make Mod Bus Card (For HPH/EH/NT use with Smart Slot in UPS)

Related Products

DELTA Make 20 KVA 3:3 Phase Industrial UPS with 20-25 Minutes Back up

DELTA Make 20 KVA 3:3 Phase Industrial UPS with 30-40 Minutes Back up

DELTA Make 20 KVA 3:3 Phase Industrial UPS with 50-60 Minutes Back up

DELTA Make 20 KVA 3:3 Phase Industrial UPS with 90-100 Minutes Back up

DELTA Make 20 KVA 3:3 Phase Industrial UPS with 110-115 Minutes Back up

DELTA Make 20 KVA 3:3 Phase Industrial UPS with 130-150 Minutes Back up

DELTA Make 20 KVA 3:3 Phase Industrial UPS with 180-200 Minutes Back up

Delta Make 20 KVA 3:3 Phase Industrial On-Line UPS With Isolation Transformer ( HPH Series )

Ultron HPH-20kVA Iso-Tx

Features

Specification

Documentation

Options

Related Products

Contact Us